Chất phân tán Perform PA8222

Sản phẩm theo hãng

Tên sản phẩm: Chất phân tán Perform PA8222
Mã sản phẩm Perform PA8222
Nhóm sản phẩm: Hóa chất giấy Tissue
Lượt xem 2242
Mua hàng
Bài viết giới thiệu sản phẩm

PERFORM® PA8222
Drainage Aid For Tissue Manufacture

PRODUCT DESCRIPTION AND USE
PerForm® PA8222 is a high molecular water soluble polymer specifically designed to improve drainage during the manufacture of tissue paper. It is a cost effective replacement for materials like polyethylene oxide, typically used in this application.
PerForm® PA8222 is completely water soluble and at low concentrations will significantly reduce hydrodynamic drag.

BENEFITS
• Water soluble polymer
• Cost effective replacement for PEO
• Reduces hydrodynamic drag
• Improves drainage when producing tissue.

PRODUCT APPLICATION
PerForm® PA8222 is typically prepared using an automatic dry make down unit. Typical solution concentration is 0.1-0.2% by weight. Fresh, clean dilution water not exceeding 45°C, should be used for optimum results. Low speed mechanical agitation (400 rpm) should continue until complete dissolution is accomplished (typically 60-75 minutes). It is
recommended that dilute solutions be used within 24 hours for optimum performance. Positive displacement pumps, such as gear or progressive cavity should be used to transfer the made down polymer solution to the point of further dilution and application. PerForm® PA8222 should be diluted to at least 0.05% by weight just prior to the feed injection point.
Proper treatment levels and application points for PerForm® PA8222 depend on such factors as machine type, furnish, chemical additives, operating conditions etc. Your Hercules representative can help to optimize application point and addition levels.
PerForm® PA8222 is to be used in accordance with control procedures Hercules establishes for a specific application.

TYPICAL PROPERTIES(a)
Appearance.......................White granular solid
Bulk Density .................................................0.8
Viscosity at 5g/l (21°C) ...................... 1700 cps
Shelf Life ........................................... 720 days

Typical properties are measured at varying intervals and may not be representative of normal lot to lot variations. There is no warranty, expressed or implied, associated with these values.

(a) Not to be construed as specifications. Specifications are available by request.

SAFETY, HEALTH, ENVIRONMENTAL, AND
REGULATORY APPROVALS FDA STATUS

PerForm® PA8222 is in compliance with requirements
of the U. S. Food and Drug Administration for use in
materials contacting foods as specified in the Code of
Federal Regulations, Title 21, subject to the limitations
and requirements of each regulation under the following Section(s):
176.170 (components of paper and paperboard in contact with aqueous and fatty foods).
176.180 (components of paper and paperboard in contact with dry food).

BfR STATUS
PerForm® PA8222 is made of components suitable for use in the production of paper or paperboard for food packaging purposes according to the XXXVI recommendation of BfR.

PRODUCT SAFETY
Read and understand the Material Safety Data Sheet (MSDS) before using this product.
Contact your Hercules Representative for more information about our Complete Solutions for Pulp and
Paper®.



Bình luận

    Chưa có bình luận nào!

Phản hồi

Bình luận từ Facebook

Sản phẩm khác cùng loại

Hỗ trợ trực tuyến

  • Hotline: 0904 022 133
  • Phòng KD hạt nhựa: 024.3776 77 22/33, ext: 102; 103
  • Email: hatnhua@alphachem.com.vn
  • Phòng KD hóa chất: 024.3776 77 22/33, ext: 104; 105
  • Email: hoachat@alphachem.com.vn
  • Fax: +8424.37767744
  • Email:
  • Facebook Hóa Chất Alpha
  • binh.alpha

Tìm kiếm nâng cao

Nhận tin sản phẩm mới

Lượt truy cập

  • Đang xem
  • Hôm nay 757
  • Tổng lượt truy cập 1,169,875

Thông tin tiện ích

UA-42631581-1