Nhựa PC Panlite L-1250Z 100, Teijin

Sản phẩm theo hãng

Tên sản phẩm: Nhựa PC Panlite L-1250Z 100, Teijin
Mã sản phẩm Nhựa PC Panlite L-1250Z 1
Nhóm sản phẩm: Hạt nhựa PC
Lượt xem 362
Mua hàng
Bài viết giới thiệu sản phẩm

Nhựa PC Panlite L-1250Z 100, Teijin

Material (Grade no)       :    L-1250Z 100

Panlite (Polycarbonate) :           Ultravoilet (UV)

 

 

 

Measurement

Weather Resistant Grade

Property

Unit

Test method

Condition

L-1250Z 100

Melt volume flow rate

cm3/10min

ISO 1133

300oC load 1.2kgf

8

Density

kg/m3

ISO 1183

-

1,200

Water absorption rate

%

ISO 62

in water 23oC 24h

0.2

Light transmission

%

ASTM D1003

thickness 3mm

88

Refractive index

-

ASTM D542

-

1.585

Tensile modules

MPa

 

1mm/min

2,400

Tensile yield stress

MPa

 

5mm/min

61

Tensile yield distortion

%

ISO 527-1

5mm/min

6.0

Tensile fracture designation distortion Tensile fracture stress

Tensile fracture distortion

%

MPa

%

and ISO 527-2

5mm/min

5mm/min 5mm/min

> 50

-

-

Flexural modulus                                                   Mpa

 

2mm/min

2,350

Flexural strength

MPa

2mm/min

93

Charpy impact strength

kJ/m2

ISO 179                  unnotched                                 NB

ISO 75-1

Load-deflection temperature                                oC                     and

1.80MPa

129

ISO 75-2

0.45MPa

142

Vicat softening temperature                                 oC                 ISO 306

50oC/h 50N

149

Mold shrinkage                                                         %                In - house

parallel (4mmt)

0.5 ~ 0.7

method

vertical (4mmt)

0.5 ~ 0.7

Coefficient of linear expansion                        x10-4/oC       ISO 11359-2

Specific inductive capacity                                       -                IEC 60250

-

parallel vertical 100Hz

1Mhz

0.7

0.7

3.1

3.0

 

ISO 178

 

notched                                   76

 

x10-4                                                                           100Hz                                     10

 

 

x10-4

 

1Mhz

90

Volume resistivity

·M

IEC 60093

-

> 1 X 1013

Surface resistivity

IEC 60093

-

> 1 X 1015

Withstand voltage

MV/m

IEC 60243-1

short time test

30

Tracking resistance

-

IEC 60112

-

250

 

 

 

 

V-2 (0.40mm)

Flammability                                                               -                    UL 94

-

HB (1.50mm)

 

electric 1.5mmt

125

Temperature index                                                  oC                 UL 746B

impact 1.5mmt

115

 

non-impact 1.5mmt

125

 

Dielectric loss tangent                                                               IEC  60250

 

The values listed are specification values, not certified values


 

 

 

Molding condition

①  Pre-drying condition

In case using box type hot blast drying machine, the thickness of the pellet layer should be 3cm or less. Set

temperature at 120oC in the drying machine, then keep pellets for 5 ~ 8 hours. The hopper of the molding

machine should be heated to maintain the pellet temperature between temperature 100oC and 120oC, and

to avoid moisture absorption.

②  Injection molding

Standard injection molding condition of Panlite are shown in the following tables.

Select a molding machine with a shot capacity of 1.5 - 3 times as that of the weight of the molded product.

< Molding condition of Panlite® LN-2250>

LN-2250

Caution

 

①  The figures listed in this catalogue are typical values obtained under standard test methods, and may not be

applicable for products that are used under different application conditions.

②  The combustion figures listed in this catalogue are from small-scale tests and may not be applicable for hazards

during a major fire.

③  These grades cannot be used for food container and food packing applications. Please call us for advice regarding

applications for medical equipment and toys.

④  When any kind of additives (such as anti-bacterial agents, stabilizers and flame retardants) or coloring agents are

to be added to this resin, please be sure to consult with Teijin Chemicals Ltd., in advance. However, even after

consultation, Teijin Chemicals Ltd., will not guarantee nor bear responsibility in any form for the usage of such

additives.

⑤  Please carefully consider all potential industrial property rights when considering applications introduced in this

catalogue.

⑥  The contents of this catalogue may be changed without prior notice.

⑦  Please refer to the Material Safety Data Sheet (MSDS) before use for other warnings in detail.



Bình luận

    Chưa có bình luận nào!

Phản hồi

Bình luận từ Facebook

Sản phẩm khác cùng loại

Hỗ trợ trực tuyến

  • Hotline: 0904 022 133
  • Phòng KD hạt nhựa: 024.3776 7722/33, ext: 102; 103
  • Email: hatnhua@alphachem.com.vn
  • Phòng KD hóa chất: 024.3776 7722/33, ext: 104; 105
  • Email: hoachat@alphachem.com.vn
  • Fax: +8424.37767744
  • Email:
  • Facebook Hóa Chất Alpha
  • binh.alpha

Tìm kiếm nâng cao

Nhận tin sản phẩm mới

Lượt truy cập

  • Đang xem
  • Hôm nay 74
  • Tổng lượt truy cập 1,529,474

Thông tin tiện ích

UA-42631581-1