Technical Information
Organopol® 6445
Chemical nature
Organopol 6445 is a non-toxic highmolar-mass water-soluble polyacrylami dederivative.
Technical data
Physical form |
white fine granules |
Bulk density |
~ 0.8 g/cm3 |
Ionic charge |
cationic |
Solid content* |
≥ 88 % |
pH-value** |
~ 4.5 |
This information only indicates a typical property of the product and MUST NOTbe taken as specification.
* 10 g dried for 2 h at 120 °C
** measured in a 0.3 % solution;deionised water
Storage
Product must be stored in a cool dryplace. All protective packaging shouldbe kept in place until the product is required for use.
Special feature
Organopol 6445 is supplied as free flowing granules with good solubility.
Polyacrylamide derivates like Organopol 6445 are the basis of stateof the art single, dual, multi componentand microparticle sludge treatment systems.
Areas of application
Flocculant for paper and pulp mill effluent treatment programs in all paper andfurnish type processes.
Recommended in single, dual, multicomponent and microparticle sludgetreatment systems.
In order to achieve best performance, it is recommended to use Organopol6445 as part of an optimized BASFsystem in combination with Hydrocol®,Polymin® and Catiofast® products.
Benefits
- Improves dewatering press outputand runnability for maximum returnon investment.
- Provides stable dewatering press conditions for maximum dry cake solidsand yield.
- Decreases press effluent solids to improve sludge yield and total solids retention efficiency.
- Enhances colloidal retention insludge cake leading to reducedBOD/COD in mill effluents.
- Provide energy savings in press operations from enhanced gravity and pressure drainage.
- Dewaters effectively in primary, secondary, tertiary, deinked and combined effluent sludge.
- Clarifies effectively in primary, secondary, tertiary and deinked effluent treatment systems.
- Performs over a wide pH range.
Bình luận
Chưa có bình luận nào!
Phản hồi
Bình luận từ Facebook